Martha starts 090121

** Beam 6b dead again; FAA radar is on

** The drift is 6p2 +012736        
** This is a spring drift....
** The pos file name is therefore:    pos_090120_+012736s.sav
**
-- Working in:  /home/rutados/data/idl/work/proc/09.01.20
   cp /home/dorado3/dorado13/galaxy/idlraw/09.01.20/*list* .
   gedit cal090120.list
   gedit drift090120.list
   >idl
   >@wasinit2
   >@alfinit
--  > callist='cal090120.list'        
   > dir='/home/dorado3/dorado13/galaxy/idlraw/09.01.20' 
   > calib1,callist,dcalON,dcalOFF,dir=dir
   > help,dcalon,/st
   > calib2,dcalON,dcalOFF,ncalib
   > Any bad boards in system?
   : y
How many bad boards? [enter n]
: 2
Enter nbeam, npol of bad board
: 6,1
Enter nbeam, npol of bad board
: 7,1
   > help,ncalib,/st
   > save, ncalib,file='ncalib_090120.sav'    
** There are 39 cal values for this run ***
** Calibration looks nice, with some curvature nfit=3

--  bpdgui
   Set the list of files (upper left; use "browse"): drift090120.list.
   Enter the new calsession: calsession_090120.sav
   Enter the new runpos: pos_090120_+012736s.sav 
   set CRAT to "fit", not "median"
**The interp regions here are [3472 to 3518] **

-- restore,'pos_090120_+012736s.sav'
   help,pos
** There are 40 drifts for this run **

-- restore,'pos_090120_+012736s.sav'
-- restore,'d214400+294831.526180333.sav'
-- flagbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6
   at end, save badboxes to file
   filename = bb
   then save pos file in case of crash
   save,pos,file='pos_090120_+012736s.sav'
-------------------------------------------------------------------------------

  d072501+012736.902000191.sav FAA; 5.1 weight 2; 1.1 weight 3
  d073508+012736.902000193.sav FAA; ok
  d074515+012736.902100002.sav 5.1 weight 2; 1.1 weight 2
  d075521+012736.902100004.sav 1.1 weight 2
  d080528+012736.902100006.sav ok
  d081535+012736.902100008.sav 1.1 weight 2
  d082541+012736.902100010.sav ok
  d083548+012736.902100012.sav ok
  d084555+012736.902100014.sav ok
  d085601+012736.902100016.sav ok
  d090608+012736.902100018.sav cont. src
  d091615+012736.902100020.sav ok
  d092621+012736.902100022.sav low weight to part of 5.1
  d093628+012736.902100024.sav ok
  d094635+012736.902100026.sav AGC 5311,190553,191357,191577
  d095642+012736.902100028.sav ok
  d100648+012736.902100030.sav wide feature(flagged out) esp.lly 0.0;0.1
  d101656+012736.902100032.sav ok
  d102703+012736.902100034.sav ok
  d103709+012736.902100036.sav AGC 204762
  d104716+012736.902100038.sav RFI! heavy flagging
  d105723+012736.902100040.sav milder RFI
  d110729+012736.902100042.sav ok
  d111737+012736.902100044.sav ok
  d112744+012736.902100046.sav AGC 214968
  d113751+012736.902100048.sav ok
  d114757+012736.902100050.sav ok
  d115805+012736.902100052.sav ok 
  d120813+012736.902100054.sav AGC 221717 AGC 7184
  d121819+012736.902100056.sav AGC 7394 AGC 221639(narrow,extended)
  d122826+012736.902100058.sav AGC 7806 AGC 221567(?)
  d123834+012736.902100060.sav 3 AGC + 3 dubious AGC (1,1 noisy status=2) 
  d124841+012736.902100062.sav AGC7991, 1 cont. src
  d125847+012736.902100064.sav ok
  d130854+012737.902100066.sav ok
  d131901+012736.902100068.sav AGC 231359
  d132908+012737.902100070.sav AGC 8566,231381,231872
  d133914+012737.902100072.sav ok
  d134921+012737.902100074.sav ok


** Be sure to save your pos file regularly!
   save,pos,file='pos_090120_+012736s.sav'
   
You can inspect the averaged, smoothed datasets for each beam using STRIP_PV and INSPECT
   strip_pv,dred,cont_pt,msmooth,n1=0,n2=6,showpol=3,gausav=11,han=5,rfimod=0,units=1
   inspect,msmooth,showpol=3,nstrip=4,agc=1

You can review your flagging using
   reviewbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6

>   print,where(pos.badbox[0,0,0,2] eq 0)


This is a nice dataset with little RFI. FAA off!