Martha starts 08.10.02
Shan continues 09.06.22

** Beam 6.1 is working again.
   A few AGCdatablock warnings but otherwise ok.
 
** The drift is 42p2 +101312         
** This is a fall drift....
** The pos file name is therefore:    pos_081002_+101312f.sav
**
-- Working in:  /home/rutados/data/idl/work/proc/08.10.02
   cp /home/dorado13/galaxy/idlraw/08.10.02/*list* .
   gedit cal081002.list
   gedit drift081002.list
   >idl
   >@wasinit2
   >@alfinit


--  > callist='cal081002.list'        
   > dir='/home/dorado13/galaxy/idlraw/08.10.02' 
   > calib1,callist,dcalON,dcalOFF,dir=dir
   > help,dcalon,/st
   > calib2,dcalON,dcalOFF,ncalib
   > Any bad boards in system?
   n
   > help,ncalib,/st
   > save, ncalib,file='ncalib_081002.sav'    
** There are 28 cal values for this run ***
** The calibration for this run looks fine.
   High Tsys points dropped Bm 3,5

--  bpdgui
   Set the list of files (upper left; use "browse"): drift081002.list.
   Enter the new calsession: calsession_081002.sav
   Enter the new runpos: pos_081002_+101312f.sav 
   set CRAT to "fit", not "median"
**The interp regions here are [3484 to 3524] **

-- restore,'pos_081002_+101312f.sav'
   help,pos
** There are 28 drifts for this run **

Shan continues from here.
Working in: /home/caborojo4/shan/flagbb/08.10.02

-- restore,'pos_081002_+101312f.sav'
-- restore,'    d214400+294831.526180333.sav'
-- flagbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6

   save,pos,file='pos_081002_+101312f.sav'

-------------------------------------------------------------------------------
  d222101+101313.827600115.sav  q1  nada      FAA on with associated spikes. Too bad!
  d223107+101313.827600117.sav  q1  0agc
  d224115+101313.827600119.sav  q1  1agc+HVC
  d225121+101313.827600121.sav  q1  0agc
  d230128+101313.827600123.sav  q1  0agc+HVC  sw 0.1
  d231135+101313.827600125.sav  q1  1agc      sw 0.1, 1.1
  d232141+101313.827600127.sav  q1  0agc+HVC
  d233148+101313.827600129.sav  q1  0agc+HVC
  d234155+101313.827600131.sav  q1  1agc+HVC
  d235202+101313.827600133.sav  q1  0agc+HVC
  d000208+101313.827600135.sav  q1  0agc
  d001215+101313.827600137.sav  q1  0agc
  d002221+101313.827700002.sav  q1  0agc
  d003228+101313.827700004.sav  q1  0agc      strong cont src 4, 3
  d004235+101313.827700006.sav  q1  0agc
  d005241+101313.827700008.sav  q1  0agc
  d010248+101312.827700010.sav  q1  0agc
  d011254+101312.827700012.sav  q1  0agc
  d012301+101312.827700014.sav  q1  1agc
  d013307+101313.827700016.sav  q1  0agc
  d014314+101312.827700018.sav  q1  1agc
  d015321+101313.827700020.sav  q1  1agc
  d020327+101312.827700022.sav  q2  1agc      streaming in all beams around rec183-307, status=3 for 0.0, status=2 for others 
  d021334+101313.827700024.sav  q1  1agc+HVC
  d022340+101313.827700026.sav  q1  0agc+HVC
  d023347+101313.827700028.sav  q1  0agc+HVC  cont src 3, 5
  d024354+101313.827700030.sav  q2  0agc+HVC  There are some spikes around (from FAA I bet)
  d025400+101313.827700032.sav  q1  1AGC+HVC  FAA on but pretty clean otherwise



** Be sure to save your pos file regularly!
   save,pos,file='pos_081002_+101312f.sav'
   
   strip_pv,dred,cont_pt,msmooth,n1=0,n2=6,showpol=3,gausav=11,han=5,rfimod=0,units=1
   inspect,msmooth,showpol=3,nstrip=4,agc=1

   reviewbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6

>   print,where(pos.badbox[0,0,0,2] eq 0)


** This is a nice dataset with FAA on, some rfi caused by FAA.

** Non=AGC galaxies as follows:
** drift     beam   rec  chan   vel  optID?   optpos          comment
** d234155     6    396  2650   4435 maybe    23.81hr+10.29deg