Martha starts 08.08.17
Betsey resumes 09.05.19


** Beam 6.1 bad. WAPP failure halfway through; Need to run 2 cals
   separately
 
** The drift is 28p2 +064848          
** This is a fall drift....
** The pos file name is therefore:    pos_080817_+064848f.sav
**
-- Working in:  /home/rutados/data/idl/work/proc/08.08.17
   cp /home/dorado13/galaxy/idlraw/08.08.17/*list* .
   cp cal080817.list  cal080817_1.list
   cp cal080817.list  cal080817_2.list
   gedit cal080817_1.list     and _2
   gedit drift080817.list 
   cp drift080817.list drift080817_1.list
   cp drift080817.list drift080817_2.list
   gedit drift080817_1.list     and _2

   >idl
   >@wasinit2
   >@alfinit

--  > callist='cal080817_1.list'        
   > dir='/home/dorado13/galaxy/idlraw/08.08.17' 
   > calib1,callist,dcalON,dcalOFF,dir=dir
   > help,dcalon,/st
   > calib2,dcalON,dcalOFF,ncalib
   > Any bad boards in system?
   : y
How many bad boards? [enter n]
: 1
Enter nbeam, npol of bad board
: 6,1
   > help,ncalib,/st
   > save, ncalib,file='ncalib_080817_1.sav'    
** There are 26 cal values for this run ***
** The calibration for this run looks ok. Couple high Tsys points dropped

Run 2nd set
 > callist='cal080817_2.list'        
   > dir='/home/dorado13/galaxy/idlraw/08.08.17' 
   > calib1,callist,dcalON,dcalOFF,dir=dir
   > help,dcalon,/st
   > calib2,dcalON,dcalOFF,ncalib
   > Any bad boards in system?
    y
How many bad boards? [enter n]
: 1
Enter nbeam, npol of bad board
: 6,1
   > help,ncalib,/st
   > save, ncalib,file='ncalib_080817_2.sav'    
** There are 7 cal values for this run ***
** The calibration for this run looks ok, though not many points


Run BPD twice
--  bpdgui
   Set the list of files (upper left; use "browse"): drift080817_1.list.
   Enter the new calsession: calsession_080817.sav
   Enter the new runpos: pos_080817_+064848f.sav 
   set CRAT to "fit", not "median"
**The interp regions here are [3485 to 3520] **
-- restore,'pos_080817_+064848f.sav'
   help,pos
** There are 26 drifts for this part of the run **

Now run the 2nd time
--  bpdgui
   Set the list of files (upper left; use "browse"): drift080817_2.list.
   APPEND the calsession: calsession_080817.sav
   APPEND the runpos: pos_080817_+064848f.sav 
   set CRAT to "fit", not "median"
**The interp regions here are [3485 to 3520] **
-- restore,'pos_080817_+064848f.sav'
   help,pos
** There are 7 drifts for this part of the run **
** and a total of 33 for the whole run

MARTHA STOPS HERE AFTER FLAGGING 1st DRIFT (bb exists)

Next, start working on FLAGBB:


-- restore,'pos_080817_+064848f.sav'
-- restore,'    d214400+294831.526180333.sav'
-- flagbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6
   at end, save badboxes to file
   filename = bb
   then save pos file in case of crash
   save,pos,file='pos_080817_+064848f.sav'

Thereafter, hit "o" to enter your own filefor BADBOX

--------------------------------------------------------------------------------
Keep track of all the drift, give a quality and comment on AGC galaxies detected,
others, or rfi problems. Please not any occurrences of GPS.

  d213210+064848.823000029.sav  q1  0 AGC  no FAA
  d214218+064848.823000031.sav  q1  0 AGC  c.s. bm 1
  d215225+064848.823000033.sav  q1  3 AGC
  d220232+064849.823000035.sav  q1  0 AGC  slight s.w 6.0
  d221241+064849.823000037.sav  q1  1 AGC
  d222247+064849.823000039.sav  q1  1 AGC
  d223254+064849.823000041.sav  q1  0 AGC
  d224300+064849.823000043.sav  q1  0 AGC
  d225307+064849.823000045.sav  q1  0 AGC  HVC
  d230315+064849.823000047.sav  q1  1 AGC
  d231321+064849.823000049.sav  q1  1 AGC  6.0 striped
  d232328+064849.823000051.sav  q1  0 AGC  HVC
  d233335+064849.823000053.sav  q1  1 AGC  HVC
  d234341+064849.823000055.sav  q1  3 AGC  HVC
  d235348+064849.823000057.sav  q3  0 AGC  radar burst at rec 200; stat=2 for bm4,0,2; stat=9 for bm3,1; HVC?
  d000354+064849.823000059.sav  q1  2 AGC
  d001402+064849.823000061.sav  q1  5 AGC  s.w. 6.0
  d002409+064849.823000063.sav  q1  1 AGC
  d003415+064849.823000065.sav  q1  2 AGC
  d004422+064849.823000067.sav  q1  0 AGC
  d005429+064849.823000069.sav  q1  1 AGC
  d010436+064849.823000071.sav  q1  0 AGC
  d011443+064849.823000073.sav  q1  4 AGC
  d012450+064848.823000075.sav  q1  0 AGC
  d013457+064848.823000077.sav  q1  0 AGC  s.w. 6.0
  d014504+064849.823000079.sav  q1   nada   ok

  d020609+064849.823000083.sav  q1  1 AGC
  d021616+064848.823000085.sav  q1  2 AGC
  d022623+064848.823000087.sav  q1  1 AGC  HVC
  d023629+064849.823000089.sav  q1  0 AGC
  d024636+064848.823000091.sav  q1  1 AGC  c.s bm4; HVC
  d025643+064849.823000093.sav  q1  0 AGC  small HVC
  d030650+064849.823000095.sav  q1  0 AGC  HVC


** Be sure to save your pos file regularly!
   save,pos,file='pos_080817_+064848f.sav'
   
   strip_pv,dred,cont_pt,msmooth,n1=0,n2=6,showpol=3,gausav=11,han=5,rfimod=0,units=1
   inspect,msmooth,showpol=3,nstrip=4,agc=1

   reviewbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6

>   print,where(pos.badbox[0,0,0,2] eq 0)


** Overall this is a good dataset, with good baselines and not much rfi **
** 6.0 seems to occasionally have slight power variations with time  
** This occurs when slight standing waves (s.w.) are seen


** Non=AGC galaxies as follows:
** drift     beam   rec  chan   vel  optID?   optpos          comment