Martha starts 08.12.11

** Observer notes intermitted power increases in Beam 0.1
** These appear as extremely high noise (Tsys) during the first
** 3 and last 3 scans. I think it is best to toss this beam.
 
** The drift is 7p1 +013454        
** This is a spring drift....
** The pos file name is therefore:    pos_080426p_+013454s.sav
**
-- Working in:  /home/rutados/data/idl/work/proc/08.04.26p
   cp /home/dorado13/galaxy/idlraw/08.04.26p/*list* .
   gedit cal080426p.list  
   gedit drift080426p.list 
   >idl
   >@wasinit2
   >@alfinit

-- > callist='cal080426p.list'           
   > dir='/home/dorado13/galaxy/idlraw/08.04.26p'  
   > calib1,callist,dcalON,dcalOFF,dir=dir
   > help,dcalon,/st
   > calib2,dcalON,dcalOFF,ncalib
   > Any bad boards in system?
   y
How many bad boards? [enter n]
: 1
Enter nbeam, npol of bad board
: 0,1
   > help,ncalib,/st
   > save, ncalib,file='ncalib_080426p.sav'     

** There are 17 cal values for this run ***
** The calibration looks ok after Beam 0.1 dropped
** One high Tsys point deleted beam 5

-- Set up and run the BPD gui.
   > bpdgui

   Enter the new calsession: calsession_080426p.sav
   Enter the new runpos: pos_080426p_+013454s.sav 
   Be sure to set CRAT to "fit", not "median"

**The interp regions here are [3485 to 3523].**

-- restore,'pos_080426p_+013454s.sav'
   help,pos
   This should tell you that "pos" is array with dimension equal to the
   number of drifts that were processed.

** There are 17 drifts for this run **

MARTHA STOPS HERE

BECKY starts 090110


-- restore,'pos_080426p_+013454s.sav'
-- restore,'d134318+013453.811700490.sav'
-- flagbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6

--------------------------------------------------------------------------------
  d134318+013453.811700490.sav  q1  1 AGC    FAA weak
  d135325+013454.811700492.sav  q1  
  d140333+013454.811800002.sav  q1  1 AGC
  d141340+013455.811800004.sav  q2  1 AGC  cs: 4,6,1  broadband burst, set N=2, rec 229-300 
  d142346+013455.811800006.sav  q1  1 AGC  sw: 1
  d143353+013454.811800008.sav  q1  2 AGC  cs: 1   
  d144360+013454.811800010.sav  q1  2 AGC    interesting ugc gal
  d145406+013455.811800012.sav  q1  
  d150413+013455.811800014.sav  q1  3 AGC  broadband burst, set N=2 532-599 
  d151420+013454.811800016.sav  q1  1 AGC 
  d152426+013455.811800018.sav  q1  1 AGC
  d153434+013454.811800020.sav  q1         cs: 3 
  d154441+013455.811800022.sav  q1  
  d155448+013454.811800024.sav  q1  1 AGC
  d160454+013455.811800026.sav  q1         cs: 1 (sw in much of 1.1)  broadband burst, set N=2: rec 213:302 
  d161502+013454.811800028.sav  q1  1 AGC  cs: 4
  d162510+013454.811800030.sav  q1         


   strip_pv,dred,cont_pt,msmooth,n1=0,n2=6,showpol=3,gausav=11,han=5,rfimod=0,units=1
   inspect,msmooth,showpol=3,nstrip=4,agc=1


>   print,where(pos.badbox[0,0,0,2] eq 0)
OK



** Overall this is a good dataset, with good baselines and not much rfi, with
exception of bad beam 0. Beam 2.0 has more rfi lines than others, especially
in higher channels. FAA is weak throughout. 3 scans have short broadband power burst. **