Martha starts 08.06.27
Betsey resumes 09.04.08

** Probable error in position of first drifts.
   Indeed the declination of the first 3 drifts is +22 degrees.
   Removing them from the drift list.
   Observer notes rfi bursts at 1400 MHz.
 
** The drift is 27p1 +062654          
** This is a fall drift....
** The pos file name is therefore:    pos_061206p_+062654f.sav
**
-- Working in:  /home/rutados/data/idl/work/proc/06.12.06p
   cp /home/toro1/galaxy/idlraw/06.12.06p/*list* .
   gedit cal061206p.list   
   gedit drift061206p.list 

   >idl
   >@wasinit2
   >@alfinit

--  > callist='cal061206p.list'        
   > dir='/home/toro1/galaxy/idlraw/06.12.06p' 
   > calib1,callist,dcalON,dcalOFF,dir=dir
   > help,dcalon,/st
   > calib2,dcalON,dcalOFF,ncalib
   > Any bad boards in system?
   "n" 
   > help,ncalib,/st
   > save, ncalib,file='ncalib_061206p.sav'    
** There are 18 cal values for this run ***
** The calibration for this run looks ok. There is some curvature.
   There are also several instances of single low CalRat; possibly 
   related to 1400 MHz rfi bursts noted by observer. These points
   are excluded from fit.

   Confirming that the first 3 drifts have the wrong Decl. recorded
   in the header. Since we don't know exactly what was wrong, 
   am dropping these three from the drift list. There are therefore
   15 good points in the drift list.

--  bpdgui
   Set the list of files (upper left; use "browse"): drift061206p.list.
   Enter the new calsession: calsession_061206p.sav
   Enter the new runpos: pos_061206p_+062654f.sav 
   set CRAT to "fit", not "median"

**The interp regions here are [3485 to 3517] **

-- restore,'pos_061206p_+062654f.sav'
   help,pos
** There are 15 drifts for this run **

MARTHA STOPS HERE AFTER FLAGGING 1st DRIFT (bb exists)

Next, start working on FLAGBB:


-- restore,'pos_061206p_+062654f.sav'
-- restore,'  d214400+294831.526180333.sav'
-- flagbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6
   at end, save badboxes to file
   filename = bb
   then save pos file in case of crash
   save,pos,file='pos_061206p_+062654f.sav'

Thereafter, hit "o" to enter your own filefor BADBOX

--------------------------------------------------------------------------------
Keep track of all the drift, give a quality and comment on AGC galaxies detected,
others, or rfi problems. Please not any occurrences of GPS.

  d005020+062655.634072908.sav  q2  1 AGC      RFI8 is broad/stronger than FAA
  d010027+062655.634073513.sav  q2  2 AGC  RFI 8 up to rec 200 GPS?
  d011033+062655.634074118.sav  q2  0 AGC  RFI 8 is not as wide now; some striping
  d012040+062655.634074723.sav  q2  1 AGC
  d013047+062655.634075328.sav  q2  0 AGC  radar burst near RFI 10 273-394; cont bm 3
  d014053+062655.634075933.sav  q2  1 AGC  radar 10 315-390 and 482-542
  d015060+062655.634076538.sav  q1  0 AGC  radar 10 219-268; mods 1.0
  d020106+062655.634077143.sav  q2  2 AGC  GPS 474-547; s.w 5.1,6.0,6.1
  d021113+062655.634077748.sav  q2  1 AGC  mods 1.0
  d022119+062655.634078353.sav  q2  1 AGC  radar 452-599; s.w. 3.1
  d023126+062655.634078958.sav  q2  2 AGC  lots of RFI 10 radar bursts
  d024133+062655.634079563.sav  q1  1 AGC  radar 0-96, GPS 505-569, HVC; mods 1.0
  d025139+062655.634080168.sav  q1  7 AGC  striping 4.0; HVC; mods 1.0
  d030146+062654.634080773.sav  q1  0 AGC  HVC
  d031152+062655.634081378.sav  q1  1 AGC  HVC  mods 1.0

** Be sure to save your pos file regularly!
   save,pos,file='pos_061206p_+062654f.sav'
   

   strip_pv,dred,cont_pt,msmooth,n1=0,n2=6,showpol=3,gausav=11,han=5,rfimod=0,units=1
   inspect,msmooth,showpol=3,nstrip=4,agc=1


   reviewbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6


>   print,where(pos.badbox[0,0,0,2] eq 0)

** Overall this is a decent dataset **
** Occasionally the baselines are poor **
** There is a fair amount of GPS plus other radar near RFI 10**


** Non=AGC galaxies as follows:
** drift     beam   rec  chan   vel  optID?   optpos          comment