Martha starts 08.06.24
Manolis finishes.

** Nothing to report in the log file; all ok.
   In calibrating, notice that first point looks bad in beam 0,3...
                   and beam 5 shows a big power jump after the first hour
                   so drop Beam 5
 
** The drift is 52p1 +123154          
** This is a fall drift....
** The pos file name is therefore:    pos_061010_+123154f.sav
**
-- Working in:  /home/rutados/data/idl/work/proc/06.10.10
   cp /home/toro1/galaxy/idlraw/06.10.10/*list* .
   gedit cal061010.list   
   gedit drift061010.list 

   >idl
   >@wasinit2
   >@alfinit

-- > callist='cal061010.list'        
   > dir='/home/toro1/galaxy/idlraw/06.10.10' 
   > calib1,callist,dcalON,dcalOFF,dir=dir
   > help,dcalon,/st
   > calib2,dcalON,dcalOFF,ncalib
   > Any bad boards in system?
   y
How many bad boards? [enter n]
: 1
Enter nbeam, npol of bad board
: 5,1
   > help,ncalib,/st
   > save, ncalib,file='ncalib_061010.sav'    
** There are 30 cal values for this run ***
** The calibration for this run looks ok except the first point gets
   excluded (Tsys/CalRat too low!) from some beams

-- bpdgui
   Set the list of files (upper left; use "browse"): drift061010.list.
   Enter the new calsession: calsession_061010.sav
   Enter the new runpos: pos_061010_+123154f.sav 
   set CRAT to "fit", not "median"

**The interp regions here are [3480 to 3520] **

-- restore,'pos_061010_+123154f.sav'
   help,pos
** There are 30 drifts for this run **

MARTHA STOPS HERE AFTER FLAGGING 1st DRIFT (bb exists)
MANOLIS continues from here:

-- restore,'pos_061010_+123154f.sav'
-- restore,'    d214400+294831.526180333.sav'
-- flagbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6

   save,pos,file='pos_061010_+123154f.sav'
--------------------------------------------------------------------------------

  d213201+123155.628374486.sav  q2  nada     GPS 521-599 strong FAA some spikes
  d214207+123155.628375091.sav q2 somewhat messy; GPS burst
  d215214+123155.628375696.sav q1 relatively clean
  d220221+123155.628376301.sav q1 clean
  d221227+123155.628376906.sav q1 clean; GPS burst
  d222234+123155.628377511.sav q1 clean; GPS burst
  d223240+123155.628378116.sav q1 relatively clean
  d224247+123155.628378721.sav q1 clean
  d225253+123155.628379326.sav q1 clean
  d230260+123155.628379931.sav q1 clean;1 agc
  d231306+123155.628380536.sav q1 clean
  d232313+123155.628381141.sav q1 clean
  d233319+123155.628381746.sav q1 clean; 1 agc
  d234326+123155.628382351.sav q1 clean
  d235333+123155.628382956.sav q1 clean
  d000339+123155.628383561.sav q1 clean
  d001346+123155.628384166.sav q2 somewhat messy; 1 agc
  d002352+123155.628384771.sav q1 clean
  d003359+123155.628385376.sav q2 messy;GPS burst + trail;1 agc? 
  d004405+123155.628385981.sav q1 rel. clean;1 agc
  d005412+123155.628400186.sav q1 rel. clean
  d010418+123154.628400791.sav q2 somewhat messy
  d011425+123155.628401396.sav q1 clean;1 agc
  d012432+123155.628402001.sav q1 clean;2 agc
  d013438+123155.628402606.sav q1 clean;2 agc!
  d014445+123155.628403211.sav q1 clean;1 agc
  d015451+123155.628403816.sav q1 clean;1 agc
  d020458+123155.628404421.sav q1 clean
  d021504+123155.628405026.sav q1 clean
  d022511+123155.628405631.sav q1 clean

** Be sure to save your pos file regularly!
   save,pos,file='pos_061010_+123154f.sav'
   
   strip_pv,dred,cont_pt,msmooth,n1=0,n2=6,showpol=3,gausav=11,han=5,rfimod=0,units=1
   inspect,msmooth,showpol=3,nstrip=4,agc=1
   reviewbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6

>   print,where(pos.badbox[0,0,0,2] eq 0)

** Overall good data, except for bm 6, which has frequent power jumps
** altering Sw pattern. In 3 scans GPS is so strong as to mess up full spetrum,
** esp in 535016433 (last scan), rendering some boards nearly unusable.

** Non=AGC galaxies as follows:
** drift     beam   rec  chan   vel  optID?   optpos          comment
**     d235543    0     430  3348   776  good     2356430+295318  small blue dwarf
**   d021714    1      44  2345  6062  maybe    0218510+294040  spiral?
**