kristine starts 070225 - There was a WAPP error mid-run - need to split the calibration. - Looking at the CRATs in calib2, it is also clear that there was a - power jump between scans 622608788 and 622609393: so there are 3 cal periods in all. ** The drift is 127p2 +305412 ** This is a fall drift.... ** The pos file name is therefore: pos_060814_+305412f.sav -- Working in: /share/a2010-2/work/kristine/06.08.14 cp /share/a2010-2/data/06.08.14/*list* . ** cals 622604549 - 622608789, drifts 622603947 - 622608788 ** gedit cal060814_1.list gedit drift060814_1.list ** cals 622609994 - 622616044, drifts 622609393 - 622615443 ** gedit cal060814_2.list gedit drift060814_2.list ** cals 622617132 - 622621971, drifts 622616530 - 622621370 ** gedit cal060814_3.list gedit drift060814_3.list >idl >@wasinit2 >@alfinit -- Perform the calibration, in 2 steps: **First set: > callist='cal060814_1.list' > dir='/share/a2010-2/data/06.08.14' > calib1,callist,dcalON,dcalOFF,dir=dir > help,dcalon,/st > calib2,dcalON,dcalOFF,ncalib > Any bad boards in system? n ** There are 9 cal values for this run *** ** The calibration looks very nice. Used nfit=1 throughout, no pts deleted. > help,ncalib,/st > save, ncalib,file='ncalib_060814_1.sav' **Second set: > callist='cal060814_2.list' > dir='/share/a2010-2/data/06.08.14' > calib1,callist,dcalON,dcalOFF,dir=dir > help,dcalon,/st > calib2,dcalON,dcalOFF,ncalib > Any bad boards in system? n ** There are 11 cal values for this run *** ** The calibration looks very nice. Used nfit=1 throughout, no pts deleted. > help,ncalib,/st > save, ncalib,file='ncalib_060814_2.sav' **Third set: > callist='cal060814_3.list' > dir='/share/a2010-2/data/06.08.14' > calib1,callist,dcalON,dcalOFF,dir=dir > help,dcalon,/st > calib2,dcalON,dcalOFF,ncalib > Any bad boards in system? n ** There are 9 cal values for this run *** ** The calibration looks very nice. Used nfit=1 throughout, no pts deleted. > help,ncalib,/st > save, ncalib,file='ncalib_060814_3.sav' > restore,'ncalib_060814_1.sav' > plot,ncalib.rahr0,ncalib.decdeg0,psym=4 -- Set up and run the BPD gui. > bpdgui ** First set: Enter the new calsession: calsession_060814.sav Enter the new runpos: pos_060814_+305412f.sav CRAT set to "fit" **The interp regions here are [3494 to 3518] ** -- "Process BP" >restore,'pos_060814_+305412f.sav' >help,pos ** There are 9 drifts for this run ** ** Second set: Append to Calsession: calsession_060814.sav Append to pos file: pos_060814_+305412f.sav CRAT set to "fit" **The interp regions here are [3498 to 3520] ** -- "Process BP" >restore,'pos_060814_+305412f.sav' >help,pos ** There are 11 drifts for this run ** ** Third set: Append to Calsession: calsession_060814.sav Append to pos file: pos_060814_+305412f.sav CRAT set to "fit" **The interp regions here are [3495 to 3520] ** -- "Process BP" >restore,'pos_060814_+305412f.sav' >help,pos ** There are 9 drifts for this run ** ** Note drift across M33 is the one that was lost due to WAPP gap, ** so no special interp regions needed. Next, start working on FLAGBB: -- restore,'pos_060814_+305412f.sav' -- restore,'d220829+305412.622603947.sav' -- flagbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6 filename = bb save,pos,file='pos_060814_+305412f.sav' -------------------------------------------------------------- -- restore,'d220829+305412.622603947.sav' d220829+305412.622603947.sav Q1 d221834+305413.622604553.sav Q1 3 AGC d222840+305413.622605158.sav Q1 1 AGC d223847+305413.622605763.sav Q1 d224853+305413.622606368.sav Q1 d225860+305413.622606973.sav Q1 d230906+305413.622607578.sav Q1 d231913+305413.622608183.sav Q1 d232919+305413.622608788.sav Q1 GPS recs 412-477; UGC gal w/o box bm 1 d233926+305413.622609393.sav Q1 ** SEE NOTE d234932+305413.622609998.sav Q1 1 AGC d235939+305413.622610603.sav Q1 1 non-AGC 1 AGC d000945+305413.622611208.sav Q1 2 AGC d001951+305413.622611813.sav Q1 2 AGC d002958+305413.622612418.sav Q1 1 AGC d004004+305413.622613023.sav Q1 GPS recs 284-497 d005011+305413.622613628.sav Q1 2 AGC; HVC ~-350km/s d010017+305413.622614233.sav Q1 1 non-AGC HVC ~-350km/s; sw 6.1 d011024+305413.622614838.sav Q1 RFI burst 1378MHz d012030+305413.622615443.sav Q1 1 AGC; HVC ~-260 km/s WAPP gap (M33 in this drift) d013840+305413.622616530.sav Q1 d014846+305413.622617135.sav Q1 1 non-AGC d015853+305413.622617740.sav Q1 1 non-AGC 1 AGC d020859+305413.622618345.sav Q1 1 AGC d021906+305413.622618950.sav Q1 2 AGC d022913+305413.622619555.sav Q1 d023919+305413.622620160.sav Q1 d024926+305413.622620765.sav Q1 d025932+305412.622621370.sav Q1 ** NOTE: the Crat plots indicate a power jump (1.5K) in bm 6.0 of d233926. ** It looks fine in flagbb, but be aware of this when gridding! save,pos,file='pos_060814_+305412f.sav' strip_pv,dred,cont_pt,msmooth,n1=0,n2=6,showpol=3,gausav=11,han=5,rfimod=0,units=1 inspect,msmooth,showpol=3,nstrip=4,agc=1 reviewbb,dred,cont_pt,mask,pos,GAUSAV=11,HAN=3,AGC=1,n1=0,n2=6 When you think you have completed a whole session, check that you did not miss any drifts by insuring that box 0 is assigned in each one: > print,where(pos.badbox[0,0,0,2] eq 0) -1 ** Overall this is a good dataset, with good baselines and not much rfi ** ** Many non-AGC galaxies, but all have opt. gals in field ** ** Non=AGC galaxies as follows: ** drift beam rec chan vel optID? optpos comment d235939 3 122 2949 2849 maybe 00h01 +30d59 a few opt gals nearby, 1 2MASS src no SDSS; no opt vels. d010017 5 24 1568 10296 likely 00h57 +30d41 2MASX J01001974+3057277 distant, normal spiral? d014846 6 406 2091 7415 likely 01h55 +30d50 KUG 0152+305A faint, face-on spiral d015853 0 27 2877 2583 likely 01h59 +30d53 KUG 0156+306A faint, edge-on spiral (not N769; wrong cz)